Skip to main content

Scandi Conversions

campervan layout

Scandi Campervan Conversions

1,2 & 3

Our Scandi model comes standard as a 2 - 3 berth, but can be made up as 4 or 5 berths if required at extra cost.

Prices quoted on this page are based on our standard conversion package with the base vehicle being a Fiat Ducato, Citroen Relay or Peugeot Boxer L3 H2

Base Vehicle
Supplied By Customer
£15,995 + VAT
Base Vehicle
Supplied By Us
from £30,995 +VAT
silver camper an parked on driveway

Standard Fittings

  • Spruce timber cladding throughout
  • Vinyl Flooring
  • Thermal bubble aluminium foil Heat Insulation
  • A Layer Of Rockwall sound insulation
  • Fully lined hard wearing garage area
  • Two roof vents
  • Near side rear fixed window (all models)
  • Off side rear fixed window (model dependant )

Optional Fittings
  • Fiamma wind out awning
  • Waeco CRX50 fridge
  • Underslung freshwater & grey water tanks
  • External Truma shower (instant hot water boiler or Truma boiler option (LPG/230v).
  • Fresh and waste tank level gauge
  • Winterise water tank (down to -20C)
  • Tambour shower door
  • Porthole shower
  • Compost or Cassette toilets
  • Single passenger seat
  • swivel base (single or double)
  • Refillable LPG Tank
  • Nearside and Off-Side sliding rear windows
  • Barn door windows
  • High-security slam locks
  • Electric steps
  • Cycle rack (2 bikes)
  • Cinema Projector and screen 
  • Air conditioning

Inside a Campervan

Standard Fixtures

  • Seating for 3 people with seat belts in the cab area
  • Bench seat with cushion(s)
  • Single Leg Solid Beech Dining Table (25 x 70cm)
  • Single 60cm bedside unit with Standard white or grey front ( model dependant )
  • Solid Beech Worktop
  • Single 100cm Double Kitchen Unit, Standard White or Grey frontage
  • Two 60x40cm Wall Cabinets, Standard White or Grey frontage
  • Porta Potti
  • Dometic TCX14 Thermo-electric cooler on soft close runners
  • Stainless Steel Sink with Kitchen Tap
  • Single 2.75kg butane gas bottle with regulator in safety locker
  • 12 litre fresh water tank below the sink
  • 10 litre grey water container below the sink

Optional Fixtures
  • Fold-down extendable kitchen worktop, solid beech, up to 40cm
  • 120cm wide double kitchen unit (to swap for 100cm)
  • Solid beech dining table (40 x 130cm)
  • A Dining bench seat extended to make the single bed (Scandi Model)
  • Extra wall cabinet with basic white or grey front
  • L-shaped lounge converting to a long single bed
  • Cab bunk system – 2 single beds in the cab
  • Single bunk bed
  • Double bunk bed
  • 30/40/60cm bedside unit, incl standard white or grey front
  • Full height wardrobe, incl standard white or grey front
  • Tiled kitchen splashback
  • Exterior Graphics

sargent consumer unit


  • 100w solar panel with 20a controller
  • 70ah leisure battery
  • MPPT solar controller
  • Mains 230v inlet (electric hook up)
  • Sargent consumer unit with mains charger built in, trip switches, 12v fuses
  • Sterling battery to battery charger
  • 230v socket
  • Sargent unit control panel
  • 8 LED lights
  • Chinese diesel heater

Optional Electrics

  • Inverter 300W,  500W or 1500W
  • Reversing camera
  • Extra camera (can switch from bumper view to rear view from the cab)
  • double 230v socket with 2 x USB charge points
  • Wi-Fi booster
  • Maxair fan
  • 21 or 35 litre Dometic thermocooler (to swap for 14 litre)
  • Long term off-grid solar system, or other solar options
  • Sat dome
  • Two Blue tooth speakers
  • upgraded stereo / sat-nav system

consumer unit in camper van conversion

Camper Van


We don't just build tiny homes on wheels we are also able to repair and service your existing leisure vehicles. As Fully trained engineers, we work on Motorhomes, Campervans as well as Horse Boxes.

Bespoke Conversions

Need a camper van tailored to your needs

Custom Campervan Conversions